? coilcraft, inc. 2007 specifications subject to change without notice. please check our website for latest information. chip inductors - 0201cs series (0503) document 320 -1 document 320-1 revised 09/21/07 inductance 2 percent 900 mhz 1.7 ghz srf typ 4 dcr max 5 i rms 6 part number 1 (nh) tolerance l typ q typ 3 l typ q typ 3 (ghz) (ohms) (ma) 0201cs-0n5xkl_ 0.5 10 0.50 29 0.49 43 >26 0.015 1400 0201cs-0n6xkl_ 0.6 10 0.58 31 0.58 51 >26 0.024 1150 0201cs-1n2xjl_ 1.2 5 1.16 42 1.16 60 24.6 0.027 1050 0201cs-1n3xjl_ 1.3 5 1.24 38 1.24 57 26.0 0.034 960 0201cs-1n4xjl_ 1.4 5 1.35 27 1.34 37 25.8 0.068 680 0201cs-1n5xjl_ 1.5 5 1.47 28 1.47 40 25.8 0.086 640 0201cs-2n3xjl_ 2.3 5 2.28 45 2.28 64 16.5 0.039 860 0201cs-2n4xjl_ 2.4 5 2.36 35 2.36 53 19.1 0.062 730 0201cs-2n5xjl_ 2.5 5 2.50 31 2.49 44 19.3 0.124 520 0201cs-3n3xjl_ 3.3 5 3.31 42 3.32 62 14.8 0.051 700 0201cs-3n7xjl_ 3.7 5 3.65 39 3.66 58 13.0 0.064 680 0201cs-3n8xjl_ 3.8 5 3.81 38 3.81 60 13.0 0.102 570 0201cs-3n9xjl_ 3.9 5 3.89 35 3.89 50 14.6 0.128 520 0201cs-4n8xjl_ 4.8 5 4.83 34 4.83 50 11.2 0.063 730 0201cs-5n2xjl_ 5.2 5 5.21 36 5.21 55 12.7 0.126 520 0201cs-5n5xjl_ 5.5 5 5.49 35 5.49 50 11.0 0.200 400 0201cs-6n7xjl_ 6.7 5 6.71 40 6.72 59 10.1 0.094 590 0201cs-7n0xjl_ 7.0 5 6.97 39 6.97 60 10.7 0.149 440 0201cs-7n5xjl_ 7.5 5 7.44 36 7.46 50 11.8 0.238 360 0201cs-8n7xjl_ 8.7 5 8.68 38 8.74 59 9.4 0.139 500 0201cs-9n0xjl_ 9.0 5 9.02 42 9.04 63 9.7 0.173 400 0201cs-9n4xjl_ 9.4 5 9.38 36 9.39 51 8.9 0.218 370 0201cs-9n6xjl_ 9.6 5 9.62 38 9.64 53 9.1 0.276 320 0201cs-11nxjl_ 11.0 5 11.11 40 11.15 62 8.5 0.197 340 0201cs-12nxjl_ 12.0 5 12.15 39 12.20 56 7.8 0.248 330 0201cs-14nxjl_ 14.0 5 14.13 37 14.37 51 7.2 0.278 320 1. when ordering, please specify termination and packaging codes: 0201cs-14nxj lw termination: l = rohs compliant silver-platinum-glass frit. special order: s = non-rohs tin-lead (63/37). packaging: w =7 machine-ready reel. eia-481 punched paper tape (2000 parts per full reel). u = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter w instead. 2. inductance measured at 250 mhz using a coilcraft smd-f fixture in an agilent/hp 4286 impedance analyzer with coilcraft-provided correlation pieces. 3. q measured using an agilent/hp 4291a with an agilent/hp 16197 test fixture. 4. srf measured using an agilent/hp 8722es network analyzer and a test fixture with a 0.010 air gap. 5. dcr measured on a micro-ohmmeter and a coilcraft ccf858 test fixture. 6. current that causes a 15c temperature rise from 25c ambient. see qualification standards section for environmental and test data. refer to doc 362 ?soldering surface mount components? before soldering. ? 0201 size ? world's smallest wirewound inductor ? 26 inductance values from 0.5 to 14 nh ? high q values ? up to 64 at 1.7 ghz! request free evaluation samples by contacting coilcraft or visiting www.coilcraft.com. designer?s kit c368 contains 20 each of all values core material ceramic terminations rohs compliant silver-palladium-platinum-glass frit. other terminations available at additional cost. weight 0.14 ? 0.23 mg ambient temperature ?40c to +125c with i rms current, +125c to +140c with derated current storage temperature component: ?40c to +140c. packaging: ?55c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles temperature coefficient of inductance (tcl) +25 to +125 ppm/c moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) mean time between failures (mtbf) 1 billion hours packaging 2000 per 7 reel. paper tape: 8 mm wide, 0.5 mm thick, 2 mm pocket spacing pcb washing only pure water or alcohol recommended
? coilcraft, inc. 2007 0201cs series (0503) specifications subject to change without notice. please check our website for latest information. document 320-2 document 320-2 revised 09/21/07 typical q vs frequency 1 10 100 1000 10000 frequency (mhz) 0 100 90 80 70 60 50 40 30 20 10 q factor 0.6 nh 2.3 nh 3.9 nh 7.0 nh 12.0 nh 1 10 100 1000 10000 frequency (mhz) 0 20 18 16 14 12 10 8 6 4 2 inductance (nh) 0.6 nh 2.3 nh 3.9 nh 7.0 nh 12.0 nh typical l vs frequency a max b max c max d e f g h 0.022 0.014 0.018 0.004 0.010 0.009 0.007 0.013 inches 0,56 0,36 0,46 0,10 0,25 0,23 0,18 0,33 mm a b overall e terminal f d d g g c h recommended land pattern terminal wraparound: approx 0.006/0,15 both ends irms derating -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 percent of rated rms i 25c
|